Active DIY Electronics Projects
(found 10 projects)
Ends a week from now
waku-ctl - The open hardware water cooling controller
Set your water cooling loop free from BIOS profiles and proprietary software
Current
18%
Backers: 6
Funding: €565 of €3,000 (18% funded)
Average daily pledges: €47
Campaign Dates: December 2nd -> December 23rd (2025)
Time left: 10 days, 6 hours, 55 minutes
Funding: €565 of €3,000 (18% funded)
Average daily pledges: €47
Campaign Dates: December 2nd -> December 23rd (2025)
Time left: 10 days, 6 hours, 55 minutes
ESpico- AI Ready, Powerful ESP32-P4 Dev Board in Pico Size
ESP32-P4 Dev Board in Pico Size with AI Speech | Wi-Fi 6 | BLE 5 | RISC-V | MIPI-CSI/DSI | MicroSD | Advanced Voice/Image Processing
Current
504%
Backers: 29
Funding: $5,043 of $1,000 (504% funded)
Average daily pledges: $252
Campaign Dates: November 24th -> December 24th (2025)
Time left: 10 days, 16 hours, 3 minutes
Funding: $5,043 of $1,000 (504% funded)
Average daily pledges: $252
Campaign Dates: November 24th -> December 24th (2025)
Time left: 10 days, 16 hours, 3 minutes
Ends two weeks from now
HexaScale — a stackable AI next-gen system
A rugged, low-profile MPU daughterboard and modular connector system for fast prototyping of high-speed AI compute modules.
Current
0%
Backers: 0
Funding: $0 of $96,000 (0% funded)
Average daily pledges: $0
Campaign Dates: October 31st -> December 30th (2025)
Time left: 17 days, 0 hours, 24 minutes
Funding: $0 of $96,000 (0% funded)
Average daily pledges: $0
Campaign Dates: October 31st -> December 30th (2025)
Time left: 17 days, 0 hours, 24 minutes
DIY Arduino Laser-Tag Kit Gaming System
Build your own high-tech laser tag experience—engineered in Australia, built by you, and ready for action
Current
0%
Backers: 0
Funding: $0 of $35,000 (0% funded)
Average daily pledges: $0
Campaign Dates: November 1st -> December 31st (2025)
Time left: 17 days, 9 hours, 11 minutes
Funding: $0 of $35,000 (0% funded)
Average daily pledges: $0
Campaign Dates: November 1st -> December 31st (2025)
Time left: 17 days, 9 hours, 11 minutes
Open-hardware RAK3112 Audio Kit
An open hardware audio IoT platform with RAK3112 (ESP32-S3 + LoRa)
Current
0%
Backers: 1
Funding: HK$380 of HK$80,000 (0% funded)
Average daily pledges: HK$38
Campaign Dates: December 4th -> January 3rd (2026)
Time left: 21 days, 5 hours, 55 minutes
Funding: HK$380 of HK$80,000 (0% funded)
Average daily pledges: HK$38
Campaign Dates: December 4th -> January 3rd (2026)
Time left: 21 days, 5 hours, 55 minutes
Ends more than three weeks from now
BreadBoard2350 — The RP2350A Dev Board
A truly breadboard-friendly, next-generation microcontroller board designed for real prototyping.
Current
123%
Backers: 20
Funding: $1,233 of $1,000 (123% funded)
Average daily pledges: $206
Campaign Dates: December 8th -> January 7th (2026)
Time left: 24 days, 16 hours, 33 minutes
Funding: $1,233 of $1,000 (123% funded)
Average daily pledges: $206
Campaign Dates: December 8th -> January 7th (2026)
Time left: 24 days, 16 hours, 33 minutes
12V to +/- 30V 1A bench power supply variable 167NZD 95USD
Super useful variable power supply that converts 12VDC ( 10 - 24V input ) to a split supply - from 0V to +/- 30V max at 1 amp, $95usd.
Current
1%
Backers: 3
Funding: $501 of $49,500 (1% funded)
Average daily pledges: $167
Campaign Dates: December 11th -> January 10th (2026)
Time left: 28 days, 0 hours, 16 minutes
Funding: $501 of $49,500 (1% funded)
Average daily pledges: $167
Campaign Dates: December 11th -> January 10th (2026)
Time left: 28 days, 0 hours, 16 minutes
Quarky Intellio: LEGO compatible DIY Kits for AI and AR
Learn AI, ML, AR and Robotics | Built-in Camera, Speaker and Mic | Works with Arduino and Pi | For Kids ages 10+, Makers and Classrooms
Current
242%
Backers: 114
Funding: $24,255 of $10,000 (242% funded)
Average daily pledges: $2,021
Campaign Dates: December 2nd -> January 11th (2026)
Time left: 28 days, 13 hours, 32 minutes
Funding: $24,255 of $10,000 (242% funded)
Average daily pledges: $2,021
Campaign Dates: December 2nd -> January 11th (2026)
Time left: 28 days, 13 hours, 32 minutes
Longer ePrint: the World's 1st Dual-head Personal UV Printer
Dual-Printhead | 60mm 3D Texture | 6x Faster | Open Ink System | 300+ Materials | AI-Powered | Compact | All-in-One | Auto-Cleaning
Current
8059%
Backers: 1510
Funding: $4,029,844 of $50,000 (8059% funded)
Average daily pledges: $212,097
Campaign Dates: November 25th -> January 24th (2026)
Time left: 41 days, 18 hours, 47 minutes
Funding: $4,029,844 of $50,000 (8059% funded)
Average daily pledges: $212,097
Campaign Dates: November 25th -> January 24th (2026)
Time left: 41 days, 18 hours, 47 minutes
Maglev Liftable Water Droplet
Suspended Water Droplet
Current
6%
Backers: 4
Funding: HK$6,050 of HK$100,000 (6% funded)
Average daily pledges: HK$550
Campaign Dates: December 3rd -> February 1st (2026)
Time left: 50 days, 4 hours, 35 minutes
Funding: HK$6,050 of HK$100,000 (6% funded)
Average daily pledges: HK$550
Campaign Dates: December 3rd -> February 1st (2026)
Time left: 50 days, 4 hours, 35 minutes
< Previous 1 Next >
(total 10 results)